Description
Product Name: Motor Generator Set (Rotary Frequency Converter) 50Hz to 60Hz – Synchronous Type
Model No. ADBF60T10
Motor Type: Brushless Synchronous Motor
Input Frequency: 50Hz
Output Frequency: 60Hz
Rated Speed: Precise 600rpm
Rating Range: 30-60kVA
General Introduction
The ADBF60T10 series Motor Generator Sets consist of a 10-pole brushless synchronous motor and a 12-pole synchronous generator. The motor and the generator are mounted on the common shaft (integrative mounting) and operate at the speed of PRECISE 600rpm. The products are designed for the applications which require a clean & accurate 60Hz power output converting from the 50Hz grid line.
The ADBF60T10 Motor Generator Sets are rated for continuous duty. They have prominent technical advantages on precise frequency output, low operation noise, reliable excitation, precise voltage regulation, outstanding voltage waveform, compact size, easy operation and no radio interference. They also have the high overload capability, best transient characteristics and rugged fabrication, which make them suitable for the applications where continuous service in a harsh environment is required.
As an option, ADBF60T10 series Motor Generator Sets can be mounted with a weather-proof enclosure, an acoustic-attenuated canopy or a trailer.
Technical Data
■ MG Set Parameters |
| Model No. | ADBF60T10-30 | ADBF60T10-40 | ADBF60T10-50 | ADBF60T10-60 |
Rated Power
| 30kVA / 24kW | 40kVA / 32kW | 50kVA / 40kW | 60kVA / 48kW |
Power Factor
| 0.8 (lag) |
Duty Cycle
| S1 (continuous) |
Insulation
| Class H |
| Protection | IP23 |
| Operation Noise | ≤55dB(A)/1m |
Mounting Structure
| The motor and the alternator are mounted on the single shaft (integrated mounting). |
Overload Capacity
| 110% rated load for 1 hour continuous in every 12 hours. |
Temperature Rise
| No more than 90°C Rise in ambience 40°C measured by resistance |
Ventilation
| Shaft-mounted fan |
Rotor Balancing
| G1.0 Grade as per ISO1940-1 |
| Ambient Temperature | -15°C to +40°C maximum without de-rating |
Altitude
| 1000m
|
| Relative Humidity | 95% with no condensation
|
Compliance
| IEC60034, NEMA MG1 & China National Standards |
■ Generator Parameters |
Rated Frequency
| 60Hz |
Pole Count
| 12 poles
|
Rated Speed
| 600rpm
|
| Rated Voltage | 3-phase 208V (line to line)
|
Winding Connection
| Wye with neutral
|
Rated Current
| 83.3A | 111.0A | 138.8A | 166.5A |
| Excitation Mode | Automatic self excitation with AVR control |
| Steady Voltage Regulation | Within ±1% (0 to 100% steady state, balanced, linear load) |
| Transient Voltage Regulation | Within ±12% (0 to 100% rated load applied or removed in one single step) |
| Voltage Recovery Time | ≤ 0.1s |
| Harmonic Distortion | THD ≤ 2.5%, single harmonic ≤ 2.0% |
■ Motor Parameters |
| Motor Type | Brushless Synchronous Motor
|
| Motor Power | 30kW | 40kW | 50kW | 60kW |
| Rated Freqency | 50Hz |
| Rated Speed | Precise 600rpm |
| Pole Count | 10 poles
|
| Rated Voltage | 3-phase 380V (line to line)
|
| Rated Current | 53.3A | 71.1A | 88.9A | 106.6A |
| Winding Connection | WYE
|
| Power Factor | ≥ 0.95 |
| Efficiency | ≥ 90% |
| Excitation Control | Automatic excitation control
|
| Starting Mode | Reduced voltage starting
|
Max. Starting Current
| ≤ 1.5 times rated current |
| Frequency Regulation | Within ±0.1% from no load to full load |
Options
l Weather-proof / sound-proof enclosure
l Analog control panel
l Digital control panel
l Trailer / trolley
Typical Structure
